2" Brake Floater, 9-1/4" Rotor, 2-Piston Caliper

Double Wide Brake Floater for 2-Piston Caliper, 2” Splined Rear Axle and 9-1/4" Brake Rotor includes our high quality standard bearing. 

Caliper spacing is 3-1/4" for the Wilwood Dynalite Single 2-Piston Brake Caliper. Fits the Hyper 600cc Jacob's Ladder Chassis. Uses the 9-1/4" brake rotor. Bearing and snap ring are included. For any and all bearings, DAYLube™ High Performance Grease is your go-to product, so be sure to have it on hand. We recommend the bearings be greased before the first use with DAYLube™ High Performance Grease as it does not fling off. 

Use 20.5" steel brake rod on '07 & Up Hyper Chassis in the standard wheelbase configuration. Use 19.5" steel brake rod on '07 & Up Hyper Chassis in the short wheelbase configuration. 

Additional hardware not included in kit: 

(1) 7/16-20 x 1-1/2" HHCS to attach the steel brake rod
(2) 3/8-24 x 1-1/2" HHCS with (2) 3/8-20 Nylock half nuts to attach the brake caliper

HYPER RACING’S GOLD STANDARD: Components marked with the gold H-Mark logo are part of Hyper Racing’s Gold Standard lineup, recommended for X4–X11 600cc Micro Sprint Chassis. Each one is tested and proven to deliver the highest level of performance, giving you confidence that you’re running parts built to meet our standard.