9-1/2" x 1/4" Titanium Brake Rotor

Fits chassis other than Hyper (D1, PMP, Ten-J, Sawyer, etc). Hyper Chassis use the 9-1/4" Ti rotor.

Made from 6AL4V titanium. This product is much lighter than steel rotors. This Ti rotor is thicker than the steel one to add longevity, measuring 6mm thick (.240", almost 1/4").

The titanium brake rotor is not only lighter than the steel rotor, but it also offers better braking when used in combination with our brake pads for titanium rotors.

Fits 1-3/4” or 2" Splined Rear Axle on our 05-102 or 06-300 splined 6-bolt sprocket carrier.