Steering Arm, Deluxe Spindle, Long

Fits both left and right side. Has a 3/8" hole for rod end bolt of steering rod. Hyper Chassis uses 7/16", most others manufacturers use 3/8". Simply tap the hole to 7/16-20 threads for use with a Hyper front end setup.

Fits deluxe spindle, for use with our original steering box or axle mount steering box for a slow ratio. Also works for direct steering on the right side. Measures 3.75" from the steering rod mounting hole to the center of the king pin.

This 16-1965 arm has 3/8-16 threaded holes for the steering arm.
The 16-194 arm has 3/8-24 threads.