9-1/4" x 3/16" Lightweight Steel Brake Rotor V2

Designed to make working on the X7 Jacob's ladder car a whole lot easier. It has hole locations strategically located to enable to removal of the shackle pin no matter what wheelbase or pin location you are using. It also allows access to use a socket on the brake caliper bolts for easy removal.

Fits 1-3/4” or 2" Splined Rear Axle on our splined 6 bolt sprocket carrier 05-102 or 06-300.

The rotor has been designed so that it is rotationally balanced.