3/4"-20 x 5/8"-36 Universal Joint, Woodward

Woodward Universal Joints are made to exacting standards from hardened chrome vanadium tool steel in two sizes. They feature ball bearing with grease seal design, stainless truss-head screws, and two set screws at each end. We recommend removing the stock set screws and replacing with a ¼-28 x ½" set screw with a jam nut (included), this will allow the set screw to have a locking nut to eliminate the possibility of the universal coming loose.

16-600 is standard on Hyper Chassis at the upper and lower U-joint when using manual steering, and on the bottom only when using our power steering.