120 Micron Pro Full Stainless Element Fuel Filter -6AN, Methanol Compatible
Brief Description
Details
Now includes new stainless steel element that has no glue, epoxy, solder, or weld which makes this a fully methanol compatible element.
Any glue, epoxy, weld, or solder will eventually fail, this element is only mechanically assembled so it will last a long, long time.
The HBS Pro Fuel Filter with 120 Micron Filter Element is recommended for electronic fuel injection to be used before the fuel pump. Aluminum housing with 6AN inlet and outlet. 120 micron stainless steel pleated filter element is removable for cleaning. This is an exclusive Hyper Racing product.
HBS Pro Filter features:
- Removable 6AN fittings that can be replaced if damaged or replaced with a -10 or -8AN fittings if needed.
- Huge stainless steel pleated element with an o-ring seal internally to insure no dirt slips through.
- Black anodized throughout to help stop corrosion
This filter should be cleaned using our Ultrasonic Cleaner 80-675 or 80-674. Compressed air and solvent will not clean the element properly.
2" diameter and 6-1/4" long.
Ratings & Reviews
No reviews available
Be the first to Write a Review