40 Micron Pro Fuel Filter -6AN, Methanol Compatible

Now includes new stainless steel element that has no glue, epoxy, solder, or weld which makes this a fully methanol compatible element.

Any glue, epoxy, weld, or solder will eventually fail, this element is only mechanically assembled so it will last a long, long time.

The HBS Pro Fuel Filter with 40 Micron Filter Element is recommended for electronic fuel injection to be used after the fuel pump. Aluminum housing with 6AN inlet and outlet. 40 micron stainless steel pleated filter element is removable for cleaning. This is an exclusive Hyper Racing product.

HBS Pro Filter features:

• Removable 6AN fittings that can be replaced if damaged or replaced with a -10 or -8 AN fittings if needed.
• Huge stainless steel pleated element with an o-ring seal internally to ensure no dirt slips through.
• Black anodized throughout to help stop corrosion.

This filter should be cleaned using our Ultrasonic Cleaner 80-675. Compressed air and solvent will not clean the element properly.

2" diameter and 6-1/4" long.