Rear Wing Upright Only for Internal Slider Wing

This item is for the upright only. This new design uses a 5/8" wing motor clamp (30-2070) which is sold separately.

Designed for wings that have a 25" spread between tabs and for frames that are 24-3/4" between the inside of the tabs, or 23-5/8" on the outside of the tabs. Uses 5/16" bolts at top and bottom. Upright is made from 4130 chromoly, powder coated black.

Does not include the inserts, 5/8" wing motor clamp (30-2070), pins, rod ends or jam nuts.