21-1/2" Wishbone, Right Side, Long Wheelbase, Upper Hole

Fits the upper hole (where the front of the wishbone mounts) on any chassis that has the upper hole. Most X6's have this hole location as well as a few X4's, and all X7's. This will only fit the X7 when the rear axle is positioned in the standard wheelbase location (long wheelbase).

Standard wishbone accepts 1/2"-20 male right hand rod end and jam nut on the front and two 7/16"-20 male right hand rod ends and jam nuts on the rear. Rod ends and jam nuts are sold separately.

The length along the top is 21.5".

Powder coated black.