2" 2X7RJB4L Bearing Carrier 4P 9 Standard Wheelbase

For 2" Splined Rear Axle. Fits the X7 Chassis on the right side. Long wheelbase, standard rear axle position configuration. Use this bearing carrier to mount the 4-piston Wilwood GP320 brake caliper 36-101 (no brake floater) on an 9-1/4" rotor. 3-1/2" brake mount bolt center distance.

CNC machined Bearing Carrier, includes double row angular contact bearing, bubble level, and grease fitting. Control arm mount distance is 6".

Maintain bearings with DAYLube™ High Performance Grease 77-800 and 77-805.

Hardware:

• (8) ¼-20 x 2" HHCS with (8) ¼" AN washers

Additional hardware not included in kit:

• (2) 7/16-14 x 1-¼" HHCS to attach the wishbone
• (2) 3/8-24 x 1-¼" HHCS with (2) 3/8" AN Washers and (2) 3/8" nylock half nuts to attach brake caliper to birdcage