2" 2X7LCLJ Bearing Carrier Standard Wheelbase, for Jacob's Ladder

For the 2" Splined Rear Axle. Fits the X7 Chassis on the left side. Use when configuring for the long wheel base, standard rear axle position. Fits Jacob's ladder configuration only. Does not work with the panhard bar configuration.

CNC machined Bearing Carrier includes double row angular contact bearing, bubble level, and grease fitting. Control arm mount distance is 6".

We recommend the bearings be greased with DAYLube™ High Performance Grease 77-800 or 77-805.

Hardware:

• (8) ¼-20 x 2" HHCS
• (2) 5/16-18 x 3” FHCS to hold the chain guide block
• (2) 1/2" spacers with (2) 5/16" hard washers.

These bolt and spacer combinations can also be used:
(2) 5/16-18 x 4" FHCS with (2) 5/16" hard washers for the 1-1/4" or 1-1/2" long spacers
(2) 5/16-18 x 3-1/2" FHCS with (2) 5/16" hard washers for the 1" or 3/4" long spacers
(2) 5/16-18 x 3" FHCS with (2) 5/16" hard washers for 1/2" or 5/16" long spacers

When purchasing this bearing carrier, go to the configurable item 05-1204-K to perfectly customize this bearing carrier for your setup.

HYPER RACING’S GOLD STANDARD: Components marked with the gold H-Mark logo are part of Hyper Racing’s Gold Standard lineup, recommended for X4–X11 600cc Micro Sprint Chassis. Each one is tested and proven to deliver the highest level of performance, giving you confidence that you’re running parts built to meet our standard.