Fan Relay Kit for Hyper Chassis Harness or Similar

Use this relay to allow the ECU turn the fan on and off as the water temperature reaches the predetermined temperature. The temperature setting is programmed into the ECU at the time it was flashed.

The two wire connectors will splice into the connection from the Hyper Chassis Harness Assembly to the fan sub harness.

The green wire (trip wire) will get pinned into the ECU connector or crimped to the relay trip wire from the ECU.

Fan Relay Signal Wires in ECU’s

Yamaha R6 ’03-’05 - Pin 42, (OEM wire color - green/yellow)

Yamaha R6 ’08-’16 - Pin 5, left connector (OEM wire color - blue/yellow)

Yamaha R6 ’17 & ’Up - Pin 20, right connector (OEM wire color - green/yellow)

Suzuki GSX-R ’08 & ’Up - Pin 6, left connector (OEM wire color - green/red)

Kawasaki ZX-6R ’05-’06 - Pin 6, left connector (OEM wire color - black/blue)

Kawasaki ZX-6R ’09-’12 - Pin 13, right connector (OEM wire color - black/blue)

Kawasaki ZX-6R ’13-’18 - Pin 17, left connector (OEM wire color - black/blue)

PE3 - Digital output 2 Pin 2, left connector (Hyper wire color-white)