1-3/4" x 56" Panhard Bar Rear Axle, Black

This 56" Panhard Bar Splined Rear Axle is designed for our panhard bar cars. It provides extra strength on the left side shoulder transition area required for use when using the panhard bar rear suspension.

56" long splined rear axle provides additional length to move the right rear and left rear wheels out farther. This longer length also allows using less offset right rear wheels for better tire wear.

CNC machined 1-3/4" diameter and 56" long splined rear axle is made from 7075 T-6 Aluminum with 27 splines. Super strong. Measures 15-3/16" from end of axle to shoulder on left, and 17-11/16" from end of axle to shoulder on right. Black anodized finish and laser etched Hyper Racing logo completes this high quality axle.

This axle has the large radiused transition into the shoulder. It requires the use of the 055-0751 (3/4") or the 055-1001 (1") radiused spacers as the first spacer to go on this axle.

Want to compare all of our axles side by side? Check out Related Documents below for measurements of all the Rear Axles on one page.