Ti-FX 10-3/4" Top Wing Post Kit for 600 Micro/Lighting Sprint

Ti-FX Top Wing Post Kits include titanium post, 7075 T651 alloy aluminum insert for maximum strength, bearings (2) and gold plated titanium bolts and nuts to hold fast. If the post bends, purchase the post and re-use the insert.

• Steel ball bearing load surface
• 7075 T651 alloy aluminum insert for maximum strength
• Titanium Post, lightweight and strong
• Titanium bolts and nuts, gold plated
• Ti-FX Branding

We stock 3 different post lengths. You can also custom cut the posts to the length of your choice.

Overall length including the insert:

• 10" post length = 12" overall length including the insert
• 8-3/4" post length = 10-3/4" overall length
• 7" post length = 9" overall length

The posts will fit both the top wing insert and the nose wing insert.

The adjustable wing posts provide an adjustable height feature to quickly raise or lower the wing height. Each adjustment hole will change the height by 1", so you can raise your wing height by 2" using this insert.

Raising the wing height will create more left side weight. Of course, too much left side weight isn't good. On small tracks where speeds are slower, not as much wind is on the wing so the resulting left side roll weight transfer is less compared to a faster speed track. Moving the wing up will increase the left side weight transfer due to the added leverage the wing has on the chassis.

If the wing is too high, it will unload the right rear too much on entry causing the car to be loose.