Hyper Components for Sharp Car Kit

These pictures are just to show you what a Sharp Mini Late Model looks like. This kit contains only the parts listed below.

Axle Mount Clamp 1-1/2 1 Ea
LW Steering Shaft- HARP 1 Ea
3/4-20 x 5/8-36 U-Joint No Bolts 2 Ea
Swaged Rod 12" x 3/8" 1 Ea
Swaged Rod 18" x 3/8" 2 Ea
Swaged Rod 19 x 7/16 1 Ea
Swaged Rod 17" x 7/16" 1 Ea
CMR6 Rod End 3/8 Male R 3 Ea
CML6 Rod End 3/8 Male L 3 Ea
CMR7 Rod End 7/16 Male R 4 Ea
CML7 Rod End 7/16 Male L 4 Ea
3/8 Right Jam Nut Steel 3 Ea
3/8 Left Jam Nut Steel 3 Ea
7/16 Right Jam Nut Steel 4 Ea
7/16 Left Jam Nut Steel 4 Ea
Bilstein SE-LM1 4 Ea
Panhard Bar Slider 1 x 7/16 2 Ea
HBS Deluxe Spindle 2 Ea
12" Upper Steering Shaft Housing 1 Ea
Kingpin Assembly for HBS Deluxe Spindles 1
Split Pinch Spindle Nut 2 Ea
1.00" Spindle/Sprocket Spacer 2 Ea
3/16 Spindle Spacer 2 Ea
Axle Mount Steering Arm, Deluxe Spindle 2 Ea
HBS Wheel Center Front (no BRK) 2 Ea
Threaded Dust Cap 2 Ea
3/8-24 x 1-1/2 HHCS 4 Ea
3/8 AN Washer 4 Ea
HBS Axle Mounted Rack Box 7/16" 1 Ea
3/8-24 x 2.25" HHCS 2 Ea
Swaged Rod 12" x 7/16" 2 Ea
7/16-20 Nylock Half Nut (10) 4 Ea
7/16-20 x 1-1/2 HHCS 2 Ea
7/16-20 x 1-3/4 HHCS 2 Ea
1-3/4" 54 Universal Splined Rear Axle, Black 1 Ea
Splined Sprocket Carrier/Brake 2 Ea
Nut, 1-3/4" Splined Axle, RH Inverted 1 Ea
Nut, 1-3/4" Splined Axle Nut, LH Inverted 1 Ea
1-3/4" Double Bearing Reducer 2 Ea
6 Bolt LW Brake Rotor 1 Ea
Sprocket Bolt Kit 1/4" 1 Ea
Bolt Kit 6 Bolt Brake Rotor1/4 1 Ea
Upper Steering Shaft Clamp 1 Ea
1-3/4 HBS Wheel Center Rear 2 Ea
1/2 Splined Tapered Spacer 3 Ea
1/8 Rear Spacer 2 Ea 1.00 Rear Spacer 4 Ea
1.00 Rear Spacer w/ Radius 2 Ea
3.00 Rear Spacer 5 Ea
Wilwood Dynalite Single II 1 Ea
Dynalite Single BP-40 Brake Pads for Ti or Steel (pair) 1 Ea
MCP Master Cylinder 1 Ea
Steel Braided Brake Line 65 1 Ea
1/8 NPT to 3AN Straight Fittin 2 Ea
600ccThrottle Cable Stock(231) 1 Ea
46 Tooth Sprocket 520 1 Ea
R6 Yamaha or Suzuki 12 tooth 1 Ea
2.00 Rear Spacer 1 Ea
2-1/2 Rear Spacer 1 Ea
1/2 Right Jam Nut Steel 6 Ea
3/8 to 1/2 Shock Reducer 4 Ea
CMR7-8 Rod End Male R 6 Ea
1.5 x 40.5 TRS Fnt Axl Coat 1 Ea
Bilstein Coil Sleeve 4 Ea Bilstein Coil Over Nut 4 Ea
Bilstein Coil Cone Top 4 Ea
Throttle Pull Rod Assembly 1 Ea
Sharp Chain Tensioner Assy 1 Ea
Tri-Lock 12" Upper Shaft with Hub & Hex 1 Ea
X7 Plate Long, Non-Threaded 1 Ea
Angular Contact Bearing-Double 2 Ea
X7 Plate Right 9" long, Single 1 Ea
1/4-20 x 2" HHCS Bearing Carrier Bolt Kit 2 Ea
Bearing Carrier Center TL, Panhard Mount 2 Ea
Chain Guide Spacers 5/16" (pair) 1 Ea
Chain Guide Block for 520 Chain 1 Ea
5/16 Hardened Washer 2 Ea
Chain Guide Nut Bar 1 Ea
Bearing Carrier Plate TLC 1 Ea
Bearing Carrier Plate Threaded 1 Ea
5/16-18 x 3-1/2 FHCS 2 Ea