• Home
  • /
  • 10" Micro Sprint Jacob's Ladder Assembly

10" Micro Sprint Jacob's Ladder Assembly

SKU 04-601-K
$89.00
(0)No Reviews yet

Brief Description

10" Jacob's Ladder (W-Link) Assembly for 600cc Micro Sprint

Details

Click the Configure button to specify our fully customizable Jacob's Ladder.

This Jacob's Ladder is considered a 5"-5"-10" ladder, because it has 5" long straps, 5" between strap holes on the paddle, and is designed for 10" between mounting holes on the frame tabs. Using these dimensions virtually eliminates the side-to-side movement of the rear axle when moving up and down.

On the Hyper Chassis, use the Multi Point Paddle selection with the top and bottom straps in the 3 hole for winged (go to 1 hole for wet heavy, and 5 holes for smooth/slick). For wingless, use the 5 holes as your starting point and go to the 3 or 1 holes for wet heavy or a big cushion. Using the 5 holes will make the car tighter, while using the 1 hole will make the car looser.

Using other manufacturer's paddles is exactly like running our 10" long paddle in the 1 hole (5" between centers).

Includes choice of 9", 9-1/2", 10", 10-1/2", 11" or 12" paddle, four 5” standard straps, hardware, and end tabs. Configure it exactly how you want. The length of the paddle will determine the position of the right rear bearing carrier. Hyper Chassis with brake caliper on the right will need the 9-1/2" or 10", and if using a brake floater, we recommend the 12". You may need to offset your right rear torsion arm a little to get the shackle to be centered on the bearing carrier when using the 12" paddle.

Ratings & Reviews

No reviews available

Be the first to Write a Review