Bearing Carrier 1-3/4" X7LCL270 for 4-Link 270cc Micro Sprint, Long Wheelbase
Details
For 1-3/4" Splined Rear Axle. Fits the X7 Chassis on the left side. Fits 33-48 tooth sprockets, generally on 270cc, long wheelbase rear axle position. Fits Jacob's ladder or panhard bar configuration. Typically, the 270 will run the rear axle in the short wheelbase configuration
CNC machined Bearing Carrier includes double row angular contact bearing, bubble level, and grease fitting. Control arm mount distance is 6".
We recommend the bearings be greased before the first use with Champion Grease 74-332 or DayLube Nanoceramic Racing Grease 77-800.
Hardware Notes:
Uses (8) 1/4-20 x 2" HHCS.
(2) 5/16-18 x 4" FHCS to hold chain guide block when using 1-1/4" or 1-1/2" long spacers with (2) 5/16" hard washers. For the 1" or 3/4" long spacers, use (2) 5/16-18 x 3-1/2" FHCS and for 1/2" or 5/16" spacers, use (2) 5/16-18 x 3" FHCS.
CNC machined Bearing Carrier includes double row angular contact bearing, bubble level, and grease fitting. Control arm mount distance is 6".
We recommend the bearings be greased before the first use with Champion Grease 74-332 or DayLube Nanoceramic Racing Grease 77-800.
Hardware Notes:
Uses (8) 1/4-20 x 2" HHCS.
(2) 5/16-18 x 4" FHCS to hold chain guide block when using 1-1/4" or 1-1/2" long spacers with (2) 5/16" hard washers. For the 1" or 3/4" long spacers, use (2) 5/16-18 x 3-1/2" FHCS and for 1/2" or 5/16" spacers, use (2) 5/16-18 x 3" FHCS.
Ratings & Reviews
No reviews available
Be the first to Write a Review